고속주행 급브레이크시 비상등 또는 ABS 작동시 비상등
09.Cent.Elect->Coding->Long Coding Helper->Byte 16->Bit 0, Bit1 체크
헤드라잇 워셔액 비활성화
09.Cent.Elect->Coding->Long Coding Helper->Byte 20->Bit 5 Headlight Washer Enabled
안개등 코너링램프
09.Cent.Elect->Coding->Long Coding Helper->Byte 14, Bit 7
사이드미러 외부열선 적용시간연장
09.Cent.Elect->Adaptation->select “Rear Window & Outside Heater Activation Time”
Cluster Staging / Gauge Needle Sweep(시동시 게이지 춤추기)
17-Instruments->Adaptation->Staging =>active로 변경
안전벨트 경고등 삭제
17.Instruments->Coding->Long Coding Helper->Byte 1->SeatBelt Warning active/installed Uncheck
깜박이 회수 조정
09.Cent.Elect->Adaptation->select “Comfort Turn Signals (cycles).” or Goto Channel 31
적용이 바로 안되는 경우에는 In the MFI/MFD (instrument cluster menu), go to Settings-->Lights and vision--> Factory setting. At the prompt "Set to factory settings for lights & vision?", select OK.
이전버젼차량
46.Central Conv.->Coding->Byte 2. bit 2 Comfort Turn Signals check
전후방 감지기 소리조정
76.Parking Aid->Adaptation->Front Buzzer Volume
레인클로징(블모 버전 작동안함)
09.Cent.Elect->Coding->콤보의 가장 아래항목 선택(RLS)
Bit 2(Rain Closing Active) 선택
Bit 5(Rain Closing inactive) 해제
2. 46.Central Conv.->Coding->콤보의 기본 선택->Long Coding Helper(BCM)
byte 9: Select 02 "Rain closing active"
3. 46.Central Conv.->Coding->Byte 7 for "Comfort Function after authorized Access only for a limited Time" and uncheck that box.
check "Comfort Function automatic Closing" in Byte 6